Preferencias

Área de Cliente

Carrinho de Compras

Filters

Personal menu

Preferencias

Procurar

anteriorBucin p/ base de grua

próximoBucin p/ veículos de carga

Bucin p/ braço de grua

Marca: Zedex

Bucin p/ braço de grua

Be the first to review this product

Solicitar Preço

COD: JG_1662

Slideway in crane boom
Material
ZX-100K
Description of the application
In this application, a suitable bearing material for the storage of the telescopic boom has been searched. The slideway is located in the rectangular guiding tube in which the boom is guided.
Problem
For esthetical reasons the lacquer mating surface of the boom must not be damaged by the sliding movement The bearing is also subjected to the weather conditions and direct sunlight exposure. There is a high surface pressure, caused by edge pressures. In addition vibrations and impacts occur during the drive. Dry running, very low wear on the slideway, no damage to the lacquer mating surface, tight thickness tolerances and absolute dimensional stability are also required.
Problem-solving
Slideways made of ZX-100K are now used. In addition, the boom was painted with a modified colour.
Working life
After extensive tests of more than 40 materials, ZX-100K has been chosen and it is now used as standard feature. In the future, also other bronze bearings should be changed with the ZX-100K ones.
Advantages
Even under load with ZX-100K slideways, an extension of the telescopic arm is possible. Preservation of the painting.
No problems for outdoor use and low maintenance thanks to dry running conditions.

Slideway in crane boom
Material
ZX-100K
Description of the application
In this application, a suitable bearing material for the storage of the telescopic boom has been searched. The slideway is located in the rectangular guiding tube in which the boom is guided.
Problem
For esthetical reasons the lacquer mating surface of the boom must not be damaged by the sliding movement The bearing is also subjected to the weather conditions and direct sunlight exposure. There is a high surface pressure, caused by edge pressures. In addition vibrations and impacts occur during the drive. Dry running, very low wear on the slideway, no damage to the lacquer mating surface, tight thickness tolerances and absolute dimensional stability are also required.
Problem-solving
Slideways made of ZX-100K are now used. In addition, the boom was painted with a modified colour.
Working life
After extensive tests of more than 40 materials, ZX-100K has been chosen and it is now used as standard feature. In the future, also other bronze bearings should be changed with the ZX-100K ones.
Advantages
Even under load with ZX-100K slideways, an extension of the telescopic arm is possible. Preservation of the painting.
No problems for outdoor use and low maintenance thanks to dry running conditions.

Produtos Relacionados

Bucin p/ base de grua

Solicitar Preço
Bucin p/ veículos de carga

Solicitar Preço
Bucin p/ veículos de carga

Solicitar Preço

Desenvolvido pela Agência PRIMEWAY - Plataformas Digitais • Design • Marketing Digital

Este site usa cookies, para guardar informação de forma segura no seu computador.
Estes cookies destinam-se a optimizar a sua experiência de navegação neste site.
Nota: Ao fazer o login na Área Restrita deste website, estará automaticamente a aceitar que cookies sejam gravados no seu computador, uma vez que estes são indispensáveis para ação de login.

Saber mais