Close
Menu
(0) items
You have no items in your shopping cart.
Catálogo
    Menu
    Carrinho de Compras
    Filters
    Preferencias
    Procurar
    anteriorBucin p/ máquinas industria...
    próximoBucin p/ máquinas industria...
    Marca: Zedex

    Bucin p/ máquinas industriais

    Be the first to review this product
    Solicitar Preço
    COD: JG_1668

    Solicite disponibilidade e preço deste produto


    Por favor solicite disponibilidade e preço deste produto clicando no botão "Criar Ticket".

     

    Material
    ZX-100K
    Description of the application
    The threaded nut is used for height adjustment of a work table. The housing is made of a machined steel pipe. The
    spindle is made of free machining steel, with a surface roughness of Ra=0.8µm.
    Load
    The long-term load is 1.000N with a spindle speed of n=23 rpm. Additionally, every 180s for a time of 120s, an axial load of 2.000N (total 3.000N) takes place on the spindle nut. Then the cycle starts all over again. The ambient temperature varies between -5°C and +40°C.
    Problem
    For the motion nut, a material with low wear and also maintenance-free was required.
    Problem-solving
    For this application a motion nut made of ZX-100K with a trapezoidal thread TR28 x 3 and a length of 30mm was used.
    Working life
    Field tests with an incremented load and a duty cycle of 100% have shown that the motion nut subjected to these parameters, and after the required working life, has signs neither of wear nor of plastic deformation. It has been used as standard feature since 1996.
    Advantages
    Maintenance, cost reduction

    Material
    ZX-100K
    Description of the application
    The threaded nut is used for height adjustment of a work table. The housing is made of a machined steel pipe. The
    spindle is made of free machining steel, with a surface roughness of Ra=0.8µm.
    Load
    The long-term load is 1.000N with a spindle speed of n=23 rpm. Additionally, every 180s for a time of 120s, an axial load of 2.000N (total 3.000N) takes place on the spindle nut. Then the cycle starts all over again. The ambient temperature varies between -5°C and +40°C.
    Problem
    For the motion nut, a material with low wear and also maintenance-free was required.
    Problem-solving
    For this application a motion nut made of ZX-100K with a trapezoidal thread TR28 x 3 and a length of 30mm was used.
    Working life
    Field tests with an incremented load and a duty cycle of 100% have shown that the motion nut subjected to these parameters, and after the required working life, has signs neither of wear nor of plastic deformation. It has been used as standard feature since 1996.
    Advantages
    Maintenance, cost reduction

    Produtos Relacionados

    Sobre a JGarraio
    Apoio ao Cliente
    Área Reservada
    Contactos
    • Praceta Augusto Dias Silva, 94 2B 2785-521 Sao Domingos de Rana
    • Tel.: +351 213 473 081
    Copyright © 2024 JGARRAIO. Todos os direitos reservados.

    As fotos apresentadas podem não corresponder as configurações descritas.
    Preços e especificações sujeitos a alteração sem aviso prévio.
    A J. Garraio declina qualquer responsabilidade por eventuais erros publicados no site.
    Todos os preços incluem IVA. Exclui o valor dos portes de envio.
    Powered by nopCommerce

    Desenvolvido pela Agência PRIMEWAY - Plataformas Digitais • Design • Marketing Digital

    Este site usa cookies, para guardar informação de forma segura no seu computador.
    Estes cookies destinam-se a optimizar a sua experiência de navegação neste site.
    Nota: Ao fazer o login na Área Restrita deste website, estará automaticamente a aceitar que cookies sejam gravados no seu computador, uma vez que estes são indispensáveis para ação de login.

    Saber mais