Close
(0) items
You have no items in your shopping cart.
Catálogo
    Filters
    Preferencias
    Procurar
    Marca: Facet

    Gerador de água doce - Model J (J-60 to J-150)

    Solicitar Preço
    COD: JG_1404

    Solicite disponibilidade e preço deste produto


    Por favor solicite disponibilidade e preço deste produto clicando no botão "Criar Ticket".

     

    Models J-60 to J-150
    These units are designed to produce fresh water for use on-board. The PECOFacet models J-60 to J-150 produce between 10 to 30 m³/day of fresh water. All produced water is monitored by the salinity control system with automatic dumping should the water contain more than 4 ppm of salt.
    Operation Description
    Hot engine cooling water is pumped by the engine circulating pump through the seawater heater and back to the engine circulating system. This water is not affected in any way except that some heat is removed. This is the heat that boils the seawater in the distilling shell. As this takes place under deep vacuum, the seawater is boiled at a very low temperature. Raw seawater is pumped continuously through the fresh water condenser. Most of the seawater is then discharged to sea. A certain quantity, however, is fed into the distilling shell where it is boiled. The seawater concentrate, or brine, is continuously drawn off from the distilling shell by a venturi ejector and discharged to sea. The vapor or steam, produced by boiling the seawater, passes through a monel mesh separator where any droplets of water or entrained particles are removed. Thus, only pure vapor enters the fresh water condenser section. This vapor passes over the tubes of the fresh water condenser where it is condensed by the cool seawater flowing through the tubes. The resultant fresh water is pumped from there to the storage tank by the fresh water pump. The distilling shell vacuum is maintained by evacuating the non-condensable gases from the shell with a venturi ejector. All fresh water is monitored by the salinity control system with automatic dumping should the water contain more than 4 ppm of salt. Safe design against failure protects valuable freshwater storage from possible salt contamination.

                                                               

                                                             Potabilizer Housings

    Brochure
    Models J-60 to J-150
    These units are designed to produce fresh water for use on-board. The PECOFacet models J-60 to J-150 produce between 10 to 30 m³/day of fresh water. All produced water is monitored by the salinity control system with automatic dumping should the water contain more than 4 ppm of salt.
    Operation Description
    Hot engine cooling water is pumped by the engine circulating pump through the seawater heater and back to the engine circulating system. This water is not affected in any way except that some heat is removed. This is the heat that boils the seawater in the distilling shell. As this takes place under deep vacuum, the seawater is boiled at a very low temperature. Raw seawater is pumped continuously through the fresh water condenser. Most of the seawater is then discharged to sea. A certain quantity, however, is fed into the distilling shell where it is boiled. The seawater concentrate, or brine, is continuously drawn off from the distilling shell by a venturi ejector and discharged to sea. The vapor or steam, produced by boiling the seawater, passes through a monel mesh separator where any droplets of water or entrained particles are removed. Thus, only pure vapor enters the fresh water condenser section. This vapor passes over the tubes of the fresh water condenser where it is condensed by the cool seawater flowing through the tubes. The resultant fresh water is pumped from there to the storage tank by the fresh water pump. The distilling shell vacuum is maintained by evacuating the non-condensable gases from the shell with a venturi ejector. All fresh water is monitored by the salinity control system with automatic dumping should the water contain more than 4 ppm of salt. Safe design against failure protects valuable freshwater storage from possible salt contamination.

                                                               

                                                             Potabilizer Housings

    Brochure

    Este site usa cookies, para guardar informação de forma segura no seu computador.
    Estes cookies destinam-se a optimizar a sua experiência de navegação neste site.
    Nota: Ao fazer o login na Área Restrita deste website, estará automaticamente a aceitar que cookies sejam gravados no seu computador, uma vez que estes são indispensáveis para ação de login.

    Saber mais