Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Cassens & Plath

    Bitácula Cassens & Plath Reflecta/3/fiberline c/ agulha tipo 21

    Call for pricing
    SKU: 10154

    Solicite disponibilidade e preço deste produto


    Por favor solicite disponibilidade e preço deste produto clicando no botão "Criar Ticket".

     

    REFLECTA/3/Fiberline is a reflector compass binnacle for worldwide use. It meets all important national and international requirements. Card diameter is 160mm and standard card height above deck level 1100mm. These dimensions are smaller than those of REFLECTA/1 and REFLECTA/2. The total length of the optical reflector arrangement to the helmsman´s position in the wheelhouse is limited to 3.5m. Horizontal optical by-passes of maximim length 2 m can be provided. REFLECTA/3 comprises all necessary components: magnetic reflector compass, azimuth device, reflection arrangement, deviation correctors (Flinder´s bar extra), illumination and installation material.

    Range of delivery
    -Compass binnacle made of reinforced fibreglass with seawater resistant fittings, flaps for light, reflection optics and corrector magazines.
    4 oblong holes in the base for A-error correction
    1 rim ring with two PTFE bearings mounted.
    1 hood without aperture, with handles.
    1 electrical light with cable type 3x1.5 mm2 lenght of cable down to 30 cm below the binnacle, bulb E14-type, 40 VA, 230 VAC to 30 cm below the binnacle, bulb E14-type, 40 VA, 230 VAC or acc. to ship´s main voltage.
    1 electrical emergency light same as above, 24VDC or as ships emergency voltage.
    1 set of fastening material comprising: 4 bolts of brass M16 acc. to ISO 2269 or M20 for UK-DoT, 4 washers with rubber gasket, 4 nuts with flange for fixing on the deck.
    2 full size D-spheres (180mm) of soft iron with index marking, fixing bolts M16, on D-brackets with distance scale.
    3 magazines (built into coluumn) with 6 B+C magnets (10 mm x 200 mm).
    1 heeling magnet and tube in binnacle column, with numbered chain, 1 magnet and tube 125 mm, 1 magnet 50 mm.
    1 name plate with serial number and approval number.

    -Optical arrangement with reflection tube comprising lenses and mountings individually adjusted to the lenght of the reflection tube.
    1 reflection tube, length individually arranged to the bridge design, 140 mm, with rectangular flange for fixture on the by pass channel.
    1 movable flange to seal the hole in the deck or ceiling visible from below.
    1 extension tube for the mirror head, extension length 150 mm arrest knob and stop
    1 mirror head at the extension tube, 360º horizontally turnable with day and night mirror and 2 adjusting knobs, vetically rotatable.

    Reflector compass
    Type 21 (order No. 33011) with directional system of 160mm, 1º division, 1ºdivision for reading from below, north/north card printing, magnetic moment app. 4 Am2, 2 lubber lines, scale ring division 1º, centre pivot for azimuth device, gimbal ring with suspension inserts.
    Standard azimuth device for compass Type 21 (order No.14100) with vanes, index marking, and hinged black mirror for vertical angles from -5º to 130º, shadow pin, stored in a wooden box.
    Weight 65 kg.
    Order No. 10154

    Standart azumith device for compass Type 21 (Order No. 14100) with vanes, index marking, and hinged black mirror for vertical angles from -5º to 130º, shadow pin, stored in a wooden box.
    Weight 65kg.
    Order No. 10154

    Flinder´s bar (optional available)
    Is necessary if the vessel crosses larger magnetic latitudes, for worldwide operation. Active length:570mm
    Comprising:
    Upper bracket (brass) with fastening material, lower bracket (brass) with fastening material, Flinder´s tube (brass), plastic cover, one each piece weak iron core of 305 mm. 152mm, 76mm, 38mm and one each wooden spacer core of 280 mm, 140mm, 70mm, 35mm.
    Weight 19.5kg
    Order No. 12500

    Accessories
    Flinder´s bar for correction of B2 error. Refer to specification before and illustration below. No.12500
    Illumination dimmer:
    230 VAC. No. 203301,
    115 VAC. No. 203302,
    24 VDC. No 203303.
    Spare compass Type 21. No 33011
    Woden storage box for spare compass Type 21. No20800
    For further accessories an addition leaflet is available:
    Lashings, canvas cover for binnacle column, spare parts outfit, clinometer for binnacle mounting, sterring lense for magnification of the reading from above the compass, course-to-steer indicator, anti-glare shield, binnacle hood with aperture or with aperture and oil lamp.


    Approvals
    BSH (Germany, NSI (Netherlands), UK-Dot (England), PRS (Poland), RRS Russian Reg., I.H.M. (Spain), MKH (Finnland), CCS China Classification, IMO A.382(X), ISO2269, Germanischer Lloyd´s, Lloyd´s Register of Shipping, ABS.

    Height of Binnacle Column
    The binnacle can be delivered in various card heights above deck level according to the necessary iron safe distance. The standard height is 1100 mm. The binnacle can be shortened to 780 mm or lengthened up to 1700 mm card height above deck level. Please state required card level with order (Dimensions j of the questionnaire).
    REFLECTA/3/Fiberline. Binnacle column short, hight. No. 10154v
    000000terceiro.jpg

    0.4.jpg0.5.jpg
    Catálogo
    REFLECTA/3/Fiberline is a reflector compass binnacle for worldwide use. It meets all important national and international requirements. Card diameter is 160mm and standard card height above deck level 1100mm. These dimensions are smaller than those of REFLECTA/1 and REFLECTA/2. The total length of the optical reflector arrangement to the helmsman´s position in the wheelhouse is limited to 3.5m. Horizontal optical by-passes of maximim length 2 m can be provided. REFLECTA/3 comprises all necessary components: magnetic reflector compass, azimuth device, reflection arrangement, deviation correctors (Flinder´s bar extra), illumination and installation material.

    Range of delivery
    -Compass binnacle made of reinforced fibreglass with seawater resistant fittings, flaps for light, reflection optics and corrector magazines.
    4 oblong holes in the base for A-error correction
    1 rim ring with two PTFE bearings mounted.
    1 hood without aperture, with handles.
    1 electrical light with cable type 3x1.5 mm2 lenght of cable down to 30 cm below the binnacle, bulb E14-type, 40 VA, 230 VAC to 30 cm below the binnacle, bulb E14-type, 40 VA, 230 VAC or acc. to ship´s main voltage.
    1 electrical emergency light same as above, 24VDC or as ships emergency voltage.
    1 set of fastening material comprising: 4 bolts of brass M16 acc. to ISO 2269 or M20 for UK-DoT, 4 washers with rubber gasket, 4 nuts with flange for fixing on the deck.
    2 full size D-spheres (180mm) of soft iron with index marking, fixing bolts M16, on D-brackets with distance scale.
    3 magazines (built into coluumn) with 6 B+C magnets (10 mm x 200 mm).
    1 heeling magnet and tube in binnacle column, with numbered chain, 1 magnet and tube 125 mm, 1 magnet 50 mm.
    1 name plate with serial number and approval number.

    -Optical arrangement with reflection tube comprising lenses and mountings individually adjusted to the lenght of the reflection tube.
    1 reflection tube, length individually arranged to the bridge design, 140 mm, with rectangular flange for fixture on the by pass channel.
    1 movable flange to seal the hole in the deck or ceiling visible from below.
    1 extension tube for the mirror head, extension length 150 mm arrest knob and stop
    1 mirror head at the extension tube, 360º horizontally turnable with day and night mirror and 2 adjusting knobs, vetically rotatable.

    Reflector compass
    Type 21 (order No. 33011) with directional system of 160mm, 1º division, 1ºdivision for reading from below, north/north card printing, magnetic moment app. 4 Am2, 2 lubber lines, scale ring division 1º, centre pivot for azimuth device, gimbal ring with suspension inserts.
    Standard azimuth device for compass Type 21 (order No.14100) with vanes, index marking, and hinged black mirror for vertical angles from -5º to 130º, shadow pin, stored in a wooden box.
    Weight 65 kg.
    Order No. 10154

    Standart azumith device for compass Type 21 (Order No. 14100) with vanes, index marking, and hinged black mirror for vertical angles from -5º to 130º, shadow pin, stored in a wooden box.
    Weight 65kg.
    Order No. 10154

    Flinder´s bar (optional available)
    Is necessary if the vessel crosses larger magnetic latitudes, for worldwide operation. Active length:570mm
    Comprising:
    Upper bracket (brass) with fastening material, lower bracket (brass) with fastening material, Flinder´s tube (brass), plastic cover, one each piece weak iron core of 305 mm. 152mm, 76mm, 38mm and one each wooden spacer core of 280 mm, 140mm, 70mm, 35mm.
    Weight 19.5kg
    Order No. 12500

    Accessories
    Flinder´s bar for correction of B2 error. Refer to specification before and illustration below. No.12500
    Illumination dimmer:
    230 VAC. No. 203301,
    115 VAC. No. 203302,
    24 VDC. No 203303.
    Spare compass Type 21. No 33011
    Woden storage box for spare compass Type 21. No20800
    For further accessories an addition leaflet is available:
    Lashings, canvas cover for binnacle column, spare parts outfit, clinometer for binnacle mounting, sterring lense for magnification of the reading from above the compass, course-to-steer indicator, anti-glare shield, binnacle hood with aperture or with aperture and oil lamp.


    Approvals
    BSH (Germany, NSI (Netherlands), UK-Dot (England), PRS (Poland), RRS Russian Reg., I.H.M. (Spain), MKH (Finnland), CCS China Classification, IMO A.382(X), ISO2269, Germanischer Lloyd´s, Lloyd´s Register of Shipping, ABS.

    Height of Binnacle Column
    The binnacle can be delivered in various card heights above deck level according to the necessary iron safe distance. The standard height is 1100 mm. The binnacle can be shortened to 780 mm or lengthened up to 1700 mm card height above deck level. Please state required card level with order (Dimensions j of the questionnaire).
    REFLECTA/3/Fiberline. Binnacle column short, hight. No. 10154v
    000000terceiro.jpg

    0.4.jpg0.5.jpg
    Catálogo

    Ce site utilise des cookies pour stocker des informations en toute sécurité sur votre ordinateur.
    Ces cookies sont conçus pour optimiser votre expérience de navigation sur ce site.
    Remarque: en vous connectant à la zone réservée de ce site Web, vous acceptez automatiquement que les cookies soient stockés sur votre ordinateur car ils sont indispensables pour la connexion.

    Apprendre plus