Close
(0) items
You have no items in your shopping cart.
Catálogo
    Filters
    Preferencias
    Procurar
    Marca: Wolfsafety

    Lanterna mini M20

    Solicitar Preço
    COD: M-20

    Solicite disponibilidade e preço deste produto


    Por favor solicite disponibilidade e preço deste produto clicando no botão "Criar Ticket".

     

    THE MICRO AND MINI TORCHES USE HIGH-TECH LIGHT SOURCES TO GIVE IMPRESSIVE PERFORMANCE WITH A COMPACT SIZE, DESIGNED FOR EASY POCKET STORAGE, AND ARE CE MARKED TO THE ATEX DIRECTIVE AND IECEX CERTIFIED FOR SAFE USE IN POTENTIALLY EXPLOSIVE GAS, VAPOUR, MIST OR DUST ATMOSPHERES, WHERE A T4 OR T5 TEMPERATURE CLASS PERMITS. ALL MODELS ARE APPROVED TO GROUP I FOR USE IN MINING APPLICATIONS.
    The LED models; M-10 Micro, M-40 and M-60 Minis are approved as Category 1 equipment for use in Zones 0, 1 and 2, and M-20 Xenon Mini is approved as Category 2 equipment for use in Zones 1 and 2.
    The M-10 Micro has a single white 5mm ‘Nichia’ LED light source and is powered by four alkaline LR44 ‘button cells’, giving an impressive beam with a two hour duration from a very compact size. The M-20 Mini uses a Xenon filament bulb powered by two LR03 ‘AAA’ cells, giving an excellent narrow beam of light with good range and up to 2.3 hours duration. The M-40 Mini has a cluster of three white 5mm ‘Nichia’ LEDs, and the M-60 Mini uses a single high power Cree LED giving remarkable light output; both products are powered by three alkaline LR1 ‘N’ cells giving up to ten hours of usable light with the M-40 and up to 3.5 hours* of usable light with the M-60. All supplied with cells.
    The Micro and Mini Torches have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance and the polycarbonate lens is set-back within the lens ring to minimise risk of damage. All models have a lanyard hole (M-10 Micro supplied with neck cord), an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single-handed switching, which is shrouded to guard against accidental operation. All models are certified IP67, sealed against water/dust ingress.
    IMPA Codes
    79 22 76 - M-10
    79 22 78 - M-40
    79 22 79 - M-60
    Features & Benefits
    ATEX and IECEx Certified
    T4/T5 temperature class
    Ultra small size
    Lightweight, ergonomic design
    Proven impact resistance
    Single handed switching
    Switch protection shroud
    Integral pen style pocket clip
    IP67 water and dust tight
    Gas and Dust Approval (M-20 Not Dust approved)
    Group I Mining Approval
    M20 details:
    Mini - Narrow Spot - Xenon Filled Filament Bulb
    Gas Zone: 1 and 2Dust Zone: 21 and 2
    THE MICRO AND MINI TORCHES USE HIGH-TECH LIGHT SOURCES TO GIVE IMPRESSIVE PERFORMANCE WITH A COMPACT SIZE, DESIGNED FOR EASY POCKET STORAGE, AND ARE CE MARKED TO THE ATEX DIRECTIVE AND IECEX CERTIFIED FOR SAFE USE IN POTENTIALLY EXPLOSIVE GAS, VAPOUR, MIST OR DUST ATMOSPHERES, WHERE A T4 OR T5 TEMPERATURE CLASS PERMITS. ALL MODELS ARE APPROVED TO GROUP I FOR USE IN MINING APPLICATIONS.
    The LED models; M-10 Micro, M-40 and M-60 Minis are approved as Category 1 equipment for use in Zones 0, 1 and 2, and M-20 Xenon Mini is approved as Category 2 equipment for use in Zones 1 and 2.
    The M-10 Micro has a single white 5mm ‘Nichia’ LED light source and is powered by four alkaline LR44 ‘button cells’, giving an impressive beam with a two hour duration from a very compact size. The M-20 Mini uses a Xenon filament bulb powered by two LR03 ‘AAA’ cells, giving an excellent narrow beam of light with good range and up to 2.3 hours duration. The M-40 Mini has a cluster of three white 5mm ‘Nichia’ LEDs, and the M-60 Mini uses a single high power Cree LED giving remarkable light output; both products are powered by three alkaline LR1 ‘N’ cells giving up to ten hours of usable light with the M-40 and up to 3.5 hours* of usable light with the M-60. All supplied with cells.
    The Micro and Mini Torches have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance and the polycarbonate lens is set-back within the lens ring to minimise risk of damage. All models have a lanyard hole (M-10 Micro supplied with neck cord), an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single-handed switching, which is shrouded to guard against accidental operation. All models are certified IP67, sealed against water/dust ingress.
    IMPA Codes
    79 22 76 - M-10
    79 22 78 - M-40
    79 22 79 - M-60
    Features & Benefits
    ATEX and IECEx Certified
    T4/T5 temperature class
    Ultra small size
    Lightweight, ergonomic design
    Proven impact resistance
    Single handed switching
    Switch protection shroud
    Integral pen style pocket clip
    IP67 water and dust tight
    Gas and Dust Approval (M-20 Not Dust approved)
    Group I Mining Approval
    M20 details:
    Mini - Narrow Spot - Xenon Filled Filament Bulb
    Gas Zone: 1 and 2Dust Zone: 21 and 2

    Este site usa cookies, para guardar informação de forma segura no seu computador.
    Estes cookies destinam-se a optimizar a sua experiência de navegação neste site.
    Nota: Ao fazer o login na Área Restrita deste website, estará automaticamente a aceitar que cookies sejam gravados no seu computador, uma vez que estes são indispensáveis para ação de login.

    Saber mais